feat: add support for rfid and wired speaker

.vscode/c_cpp_properties.json

@@ -0,0 +1,20 @@
+{
+    "configurations": [
+        {
+            "name": "Win32",
+            "includePath": [
+                "${workspaceFolder}/**",
+                "C:\\Users\\guill\\Documents\\Arduino\\libraries",
+                "C:/Users/guill/Documents/Arduino/libraries/TimerFreeTone"
+            ],
+            "defines": [
+                "_DEBUG",
+                "UNICODE",
+                "_UNICODE"
+            ],
+            "compilerPath": "cl.exe",
+            "intelliSenseMode": "windows-msvc-x64"
+        }
+    ],
+    "version": 4
+}

door-sensor/.theia/launch.json

@@ -0,0 +1,8 @@
+{
+  // Use IntelliSense to learn about possible attributes.
+  // Hover to view descriptions of existing attributes.
+  "version": "0.2.0",
+  "configurations": [
+    
+  ]
+}

door-sensor/door-sensor.ino

@@ -1,12 +1,18 @@
 #include <IRremote.hpp>
+#include <SPI.h>
+#include <MFRC522.h>
+
 #include "melody.h"
 #include "ledindicator.h"
 
 #define IR_RECEIVE_PIN 7
 
+#define RST_RFID 9
+#define CS_RFID 10
+MFRC522 mfrc522(CS_RFID, RST_RFID);
 
 
-const int DOOR_SENSOR_PIN = 13;
+const int DOOR_SENSOR_PIN = 4;
 
 
 
@@ -19,129 +25,243 @@ const int DOOR_SENSOR_PIN = 13;
 int currentDoorState; // current state of door sensor
 int lastDoorState;    // previous state of door sensor
 bool isArmed = true;
+bool isFired = false;
 bool muted = false;
 bool ledOn = true;
+bool silent = true;
+long int delta = 0;
 
 void setup()
 {
 
   Serial.begin(115200); // // Establish serial communication
+
   setupLeds();
+  // IR Control
   IrReceiver.begin(IR_RECEIVE_PIN, ENABLE_LED_FEEDBACK); // Start the receiver
+
+  //Door Sensor
   pinMode(DOOR_SENSOR_PIN, INPUT_PULLUP);
 
+  //Card Reader
+  SPI.begin();        //Iniciamos el Bus SPI
+	mfrc522.PCD_Init(); // Iniciamos  el MFRC522
+
   currentDoorState = digitalRead(DOOR_SENSOR_PIN); // read state
 
   isArmed = currentDoorState == LOW;
   Serial.println("Alarm is " + String(isArmed ? "Armed" : "Disarmed"));
-  if(useTimerFreeTone){
+  
-    Serial.println("configure to use timer free tone");
-  }
 
-  showAlarm(false);
+  pinMode(TONE_PIN, OUTPUT);
 
+  updateIndicator();
+  delta=millis();
   
 }
 int lastCmd;
 unsigned long lastTime;
 
-void showAlarm(bool fired)
+void updateIndicator()
 {
   if(!ledOn)
   {
     offLed();
     return;
   }
-  if(fired)
+  if(isFired)
   {
-    if(isArmed)
+    showRed();
-    {
+    return;
-      showRed();
+  }
-    }else{
+  if(currentDoorState==HIGH)
-      showYellow();
+  {
-    }
+    showYellow();
     return;
   }
   if(isArmed)
   {
     showBlue();
-  }else{
+    return;
-    showGreen();
   }
+  showGreen();
 }
 
 void loop() {
 
+  // IrReceiver.stopTimer();
+  handleCard();
+  // IrReceiver.restartTimer(); 
   handleDoor();
-
+ 
   handleIR();
+  handleFire();
+}
+
+
+byte ActualUID[4]; //almacenará el código del Tag leído
+byte Usuario1[4]= {0x23, 0x14, 0x1F, 0x2D} ; //código del usuario 1
+byte Usuario2[7]= {0x04, 0x38, 0x76, 0x8A, 0x2C, 0x6A, 0x80} ; //código del usuario 2
+void handleCard(){
+  
+  // Revisamos si hay nuevas tarjetas  presentes
+	if ( !mfrc522.PICC_IsNewCardPresent()) 
+  {
+    return;
+  }
+
+  if(millis() < delta +2000){
+    Serial.print(".");
+    return;
+  }
+  delta=millis();
+
+  //Seleccionamos una tarjeta
+  if (! mfrc522.PICC_ReadCardSerial()) 
+  {
+    Serial.println("not readable");
+    mfrc522.PICC_HaltA();
+    mfrc522.PCD_StopCrypto1();
+    showErrorReader();
+    return;
+  }
+  
+  // Enviamos serialemente su UID
+  Serial.print(F("Card UID:"));
+  for (byte i = 0; i < mfrc522.uid.size; i++) {
+    Serial.print(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " ");
+    Serial.print(mfrc522.uid.uidByte[i], HEX);   
+
+    ActualUID[i]=mfrc522.uid.uidByte[i];          
+  } 
+  Serial.print("     ");                 
+  //comparamos los UID para determinar si es uno de nuestros usuarios  
+  if(!grantAccess()){
+    Serial.println("Acceso denegado...");
+    showErrorReader();
+    return;
+  }
+  Serial.println("Acceso concedido!");
+
+  isArmed=false;
+  isFired=false;
+  updateIndicator();
+  // Serial.println("Alarm is " + String(isArmed ? "Armed" : "Disarmed"));
+
+  // Terminamos la lectura de la tarjeta tarjeta  actual
+  mfrc522.PICC_HaltA();
+  mfrc522.PCD_StopCrypto1();
+}
+
+bool grantAccess(){
+  if(compareArray(ActualUID,Usuario1)){
+    return true;
+  }else if(compareArray(ActualUID,Usuario2)){
+    return true;
+  }
+  return false;
+}
+//Función para comparar dos vectores
+bool compareArray(byte array1[],byte array2[])
+{
+  if(array1[0] != array2[0])return(false);
+  if(array1[1] != array2[1])return(false);
+  if(array1[2] != array2[2])return(false);
+  if(array1[3] != array2[3])return(false);
+  return(true);
+}
+
+
+void handleIR(){
+  if (!IrReceiver.decode()) return;
+  if(IrReceiver.decodedIRData.flags & IRDATA_FLAGS_IS_REPEAT)
+  {
+    IrReceiver.resume();
+    return;
+  }
+  switch(IrReceiver.decodedIRData.command)
+  {
+    case 67:
+      Serial.println("Play");
+      isArmed=!isArmed;
+      updateIndicator();
+      Serial.println("Alarm is " + String(isArmed ? "Armed" : "Disarmed"));
+      // playTone();
+      break;
+    case 70:
+      Serial.println("Led on/off");
+      ledOn=!ledOn;
+      updateIndicator();
+      break;
+    case 9:
+      silent=!silent;
+      Serial.println("Silent: "+ String(silent));
+      break;
+    case 0:
+      Serial.println("-");break;
+    default:
+      Serial.print("unk: ");
+      Serial.println(IrReceiver.decodedIRData.command);
+  }
+  
+
+  IrReceiver.resume();
   
 }
 
-void handleIR(){
-  if (IrReceiver.decode()) {
-      if(IrReceiver.decodedIRData.flags & IRDATA_FLAGS_IS_REPEAT)
-      {
-        IrReceiver.resume();
-        return;
-      }
-      switch(IrReceiver.decodedIRData.command)
-      {
-        case 67:
-          Serial.println("Play");
-          isArmed=!isArmed;
-          showAlarm(false);
-          Serial.println("Alarm is " + String(isArmed ? "Armed" : "Disarmed"));
-          // playTone();
-          break;
-        case 70:
-          Serial.println("Led on/off");
-          ledOn=!ledOn;
-          showAlarm(false);
-          break;
-        default:
-          Serial.print("unk: ");
-          Serial.println(IrReceiver.decodedIRData.command);
-      }
-      
-      //IrReceiver.printIRResultShort(&Serial); // Print complete received data in one line
-      // lastTime = millis();
-      // lastCmd=IrReceiver.decodedIRData.command;
-      //Serial.println(IrReceiver.decodedIRData.command);
-
-      IrReceiver.resume();
-  }
-}
-
 void handleDoor(){
+  if(isFired) return;
   lastDoorState = currentDoorState;              // save the last state
   currentDoorState  = digitalRead(DOOR_SENSOR_PIN); // read new state
 
   // state change: LOW -> HIGH
   if (lastDoorState == LOW && currentDoorState == HIGH) { 
-    Serial.println("The door-opening event is detected");
+    Serial.println("The door-opening");
     if(!isArmed)
     {
       Serial.println("Alarm is dissarmed, not fireing");
-      delay(500);
+
-      showAlarm(true);
+      
+      updateIndicator();
       return;
     }
     Serial.println("Alarm is armed, firing");
-    showAlarm(true);
+    isFired=true;
-    if(!muted)
+    updateIndicator();
-      playTone();
+    
   }
   else
   if (lastDoorState == HIGH && currentDoorState == LOW) { // state change: HIGH -> LOW
     delay(500);
-    Serial.println("The door-closing event is detected");
+    Serial.println("The door-closing");
     isArmed=true;
-    showAlarm(false);
+    updateIndicator();
     // TODO: turn off alarm, light or send notification ...
   }
 }
 
+void showErrorReader(){
+  showRed();
+  delay(100);
+  offLed();
+  delay(100);
+  showRed();
+  delay(100);
+  offLed();
+  delay(100);
+  updateIndicator();
+}
+
+void handleFire(){
+  if(muted || !isFired)
+    return;
+
+  IrReceiver.stopTimer();
+  // playTone();
+  playAlarm(silent);
+  IrReceiver.restartTimer(); 
+}
+
 
 
 

door-sensor/melody.h

@@ -17,37 +17,48 @@ int duration2[] = { 250, 125, 125, 250, 250, 250, 250, 250 };
 int melody3[] = { 262, 196};
 int duration3[] = { 250, 125};
 
-const bool useTimerFreeTone =true;
 
 #define TONE_PIN 8
 
 
 
 void playTone(){
-  if(useTimerFreeTone){
+
-    
+//   digitalWrite(TONE_PIN, HIGH);
-    for (int thisNote = 0; thisNote < 8; thisNote++) { // Loop through the notes in the array.
+//   delay(2000);
-      TimerFreeTone(TONE_PIN, melody2[thisNote], duration2[thisNote]); // Play thisNote for duration.
+//   digitalWrite(TONE_PIN, LOW);
-      delay(50); // Short delay between notes.
+// return;
-    }
+  for (int thisNote = 0; thisNote < 8; thisNote++) { // Loop through the notes in the array.
-    return;
+    TimerFreeTone(TONE_PIN, melody2[thisNote], duration2[thisNote]); // Play thisNote for duration.
+    delay(50); // Short delay between notes.
   }
+    
+}
 
-  // // iterate over the notes of the melody:
+float sinVal;
-  // for (int thisNote = 0; thisNote < 8; thisNote++) {
+int toneVal;
 
-  //   // to calculate the note duration, take one second divided by the note type.
+void playSound(bool silent){
-  //   //e.g. quarter note = 1000 / 4, eighth note = 1000/8, etc.
+  int max = 180;
-  //   int noteDuration = 1000 / noteDurations[thisNote];
+  if(silent)
-  //   tone(TONE_PIN, melody[thisNote], noteDuration);
+    max = 2;
+  for(int x = 0; x < max ; x++){
+    //convert angle of sinusoidal to radian measure
+    sinVal = (sin(x*(3.1412/180)));
+    //generate sound of different frequencies by sinusoidal value
+    toneVal = 2000+(int(sinVal*1000));
+    //Set a frequency for Pin-out 8
+    tone(TONE_PIN, toneVal, 3);
+    // TimerFreeTone(TONE_PIN, toneVal, 2, 5);
+    delay(2);
+  }
+  noTone(TONE_PIN);
+}
+
+
+void playAlarm(bool silent){
+  playSound(silent);
+  delay(500);
+}
 
-  //   // to distinguish the notes, set a minimum time between them.
-  //   // the note's duration + 30% seems to work well:
-  //   int pauseBetweenNotes = noteDuration * 1.30;
-  //   delay(pauseBetweenNotes);
-  //   // stop the tone playing:
-  //   noTone(TONE_PIN);
-  // }
 
-  
-}